Cable festooned systems-series
Profile-running rail
The
types “CRL-1” and “CRL-2” are available.
The difference between those two running rails is to
be found in their dimensions. The dimensions profile
running-rail “CRL-2” are
bigger and it requires different cable trolleys, which have a higher
carrying capacity. All profile-running rails are made of steel and are
sendzimir galvanized to grant a long service life of the products. The
standard length of the profile-running rails is 6 m (resp. 3 m). Acc.
to requirements they can be extended by means of rail-connectors. If
less than 6 m (resp. 3 m) are required we will cut the profile-running
rails to the corresponding length. You will only have to pay for each
partially fractured metre.
The profile-running rails “CRL-1” and “CRL-2”
The
profile-running rail “CRL-1” was designed for lower carrying
capacities. The most stable cable trolley for this profile-running rail
has a carrying capacity of 15 kg. The profile-running rail “CRL-2” differs
from the profile-running rail “CRL-1” with regard to its
dimensions. This type is meant for bigger cable trolleys with a higher
carrying capacity. The most stable cable trolley for the profile-running
rail “CRL-2” has a carrying capacity of 35 kg.
Cable trolleys
Cable
trolleys have the function to fix and to move cables or hoses in the
area of the profile-running rail. The cable trolleys are made of galvanized
steel and are beared on rollers so that they can be moved easily in the
area of the profile-running rail.
They are equipped with a rubber- or plastic plating
for that the transported cable is not damaged. The cable trolleys for
the profile-running rails “CRL-1” and “CRL-2” can
be operated at a travel speed of up to 60 m/min. Inclined traction of
cable trolleys should be avoided. Generally, the cable trolleys are equipped
with a small boring at their exterior. This boring serves for attachment
of a trolley-carrier, in case this is required.
We distinguish the cable trolleys between the following basic types:
 |
flat- and round cable trolleys |
|
trolley-carriers |
|
support trolleys |
|
control trolleys |
|
end supports |
Flat cable trolleys for the profile-running rail CRL-1
Pendular version, types “LFCR” and “LFCRK”
The flat cable trolleys in pendular version are available in types “LFCR” and “LFCRK”. Those two versions differ with regard to the carrying capacity which they can carry and the material of the running wheels. Compared to the cable trolleys in “rigid version” the cable trolleys in “pendular version” have the advantage that they are better suitable for the cable guidance in curved forms (provided that your cable festooned systems includes curved pieces).
Rigid
version, types “LFSCR” and “LFSCRK”
Our flat cable trolleys in rigid version are available in different types which you can compose acc. to your requirements. The individual types differ with regard to the material of the running wheels, the length of the cable trolley, the width of the cable and the support radius. The big advantage of rigid cable trolleys is that the cables cannot be twisted in the area of the stacking length.
Rigid version, type “LKF”
The type “LKF” basically differs from the other cable trolleys since the cable rest as well as the running wheels are made of plastic (polyamide). The advantage of this plastic-cable trolley is that it is designed for ambient conditions at which steel-cable trolleys cannot be used. Although the cable trolley is of very light weight, during operation a high stability is achieved due to the weight of the cable. Since the cable trolley “LKF” has a carrying capacity of 15 kg it can also be used at high loads.
